PORSCHE 914 HEAD UNIT
Can't find what you need? Try browsing the Accessories or Exploded Diagrams!<-- Try narrowing by car using the menu to the left.
Complete carburetion kits !
Complete kits include pre-jetted and sized carburetors, manifolds, linkage, K&N watershield air cleaners, pressure control unit, heat insulator kit, oil tank breather, fuel line & filter, clamps, injector plugs (as needed), power brake check valve (as needed) and complete installation instructions.
The pmo carburetor was designed from the beginning to be a state-of-the art carburetor. Pmo start off with a casting designed around a 50mm throttle plate and downsized to 46 and 40mm to achieve three different sizes. This compares favorably with conventional carburetors, including weber.
The air entry and flow is much greater than the weber. This is accomplished by having larger ma...(choose a part on the right to read more)
General Fitment 911 1974-77 911 1978-83 911 1984-86 911 1987-89 911 1989-94 911 1994-98
$10,902.10
Make a selection
Genuine: engine - 6 cylinder boxer twin-turbo capacity - 3600ccm compression ratio - 9,0:1 max. Power - 390kw (530hp) @ 6500rpm max. Torque - 680nm (502lbf ft) @ 2200-4500rpm max. Speed - 329km/h max. Rpm - 6800rpm acceleration 0-100km/h - 3.7s tuning: max. Power - 449kw (610hp) @ 6500rpm max. Torque - 780nm (575lbf ft) @ 4500rpm max. Speed - 340km/h max. Rpm - 7000rpm acceleration 0-100km/h - 3.4s FVD dme / ecu programming philosophy: for more than 20 years, FVD-Brombacherhas been setting the standard for Porsche engine management software tuning. FVD-Brombacherhas perfected the art of Porsche tuning making substantial gains in horsepower and torque, all while retaining the drivability and most importantly r...(choose a part on the right to read more)
General Fitment 911 TURBO/GT2 2007-09
From $7,602.10
Make a selection
Genuine:
Engine - 6 cylinder boxer twin-turbo
Capacity - 3600ccm
Compression ratio - 9,0:1
Max. Power - 390kw (530hp) @ 6500rpm
Max. Torque - 680nm (502lbf ft) @ 2200-4500rpm
Max. Speed - 329km/h
Max. Rpm - 6800rpm
Acceleration 0-100km/h - 3.7s
Tuning:
Max. Power - 426kw (580hp) @ 6500rpm
Max. Torque - 750nm (553lbf ft) @ 4500rpm
Max. Speed - 335km/h
Max. Rpm - 7000rpm
Acceleration 0-100km/h - 3.5s
FVD dme / ecu programming philosophy:
For more than 20 years, FVD-Brombacherhas been setting the standard for Porsche engine management software tuning. FVD-Brombacherhas perfected the art of Porsche tuning making substantial gains in horsepower and torque, all while retaining the drivability ...(choose a part on the right to read more)
General Fitment 911 TURBO/GT2 2007-09
$1,923.90
Make a selection
Genuine:
Engine - 6 cylinder boxer twin-turbo
Capacity - 3600ccm
Compression ratio - 9,0:1
Max. Power - 456kw (620hp) @ 6500rpm
Max. Torque - 700nm (516lbf ft) @ 2250-5500rpm
Max. Speed - 330km/h
Max. Rpm - 6800rpm
Acceleration 0-100km/h - 3.5s
Tuning:
Max. Power - 485kw (660hp) @ 6500rpm
Max. Torque - 750nm (553lbf ft) @ 4500rpm
Max. Speed - 335km/h
Max. Rpm - 7000rpm
Acceleration 0-100km/h - 3.4s
FVD dme / ecu programming philosophy:
For more than 20 years, FVD-Brombacherhas been setting the standard for Porsche engine management software tuning. FVD-Brombacherhas perfected the art of Porsche tuning making substantial gains in horsepower and torque, all while retaining the drivability ...(choose a part on the right to read more)
General Fitment 911 TURBO/GT2 2010-13
$1,912.90
Make a selection
To achieve a louder and higher pitched exhaust sound with every kreissieg exhaust system, youll find that their stainless headers are a recommended installation. These stainless headers were carefully developed along with each exhaust system to provide optimal performance.
Kreissieg strongly recommends these headers when you purchase one of their exhaust systems to get the best experience possible.
Made from stainless steel material
Note: kreissieg can not guarantee "no cel" with this unit because every car has different emission specs depending on country.
*every kreissieg exhaust system is built to order specifically to each customers request and each handcrafted system takes 14-...(choose a part on the right to read more)
General Fitment 911 1998-05
$4,911.93
Make a selection
Genuine:
Engine - 6 cylinder boxer twin-turbo
Capacity - 3600ccm
Compression ratio - 9,0:1
Max. Power - 390kw (530hp) @ 6500rpm
Max. Torque - 680nm (502lbf ft) @ 2200-4500rpm
Max. Speed - 329km/h
Max. Rpm - 6800rpm
Acceleration 0-100km/h - 3.7s
Tuning:
Max. Power - 449kw (610hp) @ 6500rpm
Max. Torque - 780nm (575lbf ft) @ 4500rpm
Max. Speed - 340km/h
Max. Rpm - 7000rpm
Acceleration 0-100km/h - 3.4s
FVD dme / ecu programming philosophy:
For more than 20 years, FVD-Brombacherhas been setting the standard for Porsche engine management software tuning. FVD-Brombacherhas perfected the art of Porsche tuning making substantial gains in horsepower and torque, all while retaining the drivabi...(choose a part on the right to read more)
General Fitment 911 TURBO/GT2 2007-09
$7,643.24
Make a selection
To achieve a louder and higher pitched exhaust sound with every kreissieg exhaust system, youll find that their stainless headers are a recommended installation. These stainless headers were carefully developed along with each exhaust system to provide optimal performance.
Kreissieg strongly recommends these headers when you purchase one of their exhaust systems to get the best experience possible.
Made from stainless steel material
Note: kreissieg can not guarantee "no cel" with this unit because every car has different emission specs depending on country.
*every kreissieg exhaust system is built to order specifically to each customers request and each handcrafted system takes 14-...(choose a part on the right to read more)
General Fitment 911 1998-05
$4,911.93
Make a selection
Complete carburetion kits !
Complete kits include pre-jetted and sized carburetors, manifolds, linkage, K&N watershield air cleaners, pressure control unit, heat insulator kit, oil tank breather, fuel line & filter, clamps, injector plugs (as needed), power brake check valve (as needed) and complete installation instructions.
The pmo carburetor was designed from the beginning to be a state-of-the art carburetor. Pmo start off with a casting designed around a 50mm throttle plate and downsized to 46 and 40mm to achieve three different sizes. This compares favorably with conventional carburetors, including weber.
The air entry and flow is much greater than the weber. This is accomplished by having larger ma...(choose a part on the right to read more)
General Fitment 911 1965-69 911 1970-73 911 1974-77 930 1975-77 911 1978-83 911 1984-86 911 1987-89
$10,363.66
Make a selection
To achieve a louder and higher pitched exhaust sound with every kreissieg exhaust system, youll find that their stainless headers are a recommended installation. These stainless headers were carefully developed along with each exhaust system to provide optimal performance.
Kreissieg strongly recommends these headers when you purchase one of their exhaust systems to get the best experience possible.
Made from stainless steel material
Note: kreissieg can not guarantee "no cel" with this unit because every car has different emission specs depending on country.
*every kreissieg exhaust system is built to order specifically to each customers request and each handcrafted system takes 14-...(choose a part on the right to read more)
General Fitment 911 1998-05
$4,584.56
Make a selection
For those wanting to make 800-1000 horsepower, we have this turbo kit that uses garrett GT series turbos and tial 44mm external wastegates. We have included the basic price for the upgrade here. Below is a selection of modifications you can choose from to build your vehicle with some or all of the performance parts you need to complete your 996 turbo.
The upgrade kit for the Porsche 996 turbo is a combination of proper fueling, air flow, and ecu tuning. The GT3076rs turbochargers or the GT2860rs turbos can be used with this kit. To reach these power levels, it does require a custom fuel system, larger throttle body and t plenum, custom y pipe, intake to turbo inlet system, and more. All of the parts ...(choose a part on the right to read more)
General Fitment 911 TURBO/GT2 2001-05
$4,725.00
Make a selection
Gauge series: cockpit international
Type: cylinder head temperature
Included: 14mm dia thermal sender
Replacement part for cylinder head temp gauge kit
General Fitment ALL
Whether you bent all the valves in your 944 when the cam belt broke or you have a 924 that is just tired and needs some top end attention, we can help! Let our expert machine shop take the hassle out of cylinder-head remanufacturing. Install our rebuilt units with confidence. All cylinder heads include new valves, valve guides, valve springs and valve seals (and a 6-month, 6,000-mile warranty).
View/Change Diagram
$4,709.17
Make a selection
Known as: headlamp unit
View/Change Diagram
Known as: headlamp litronic 2.0 without ignition control unit see technical information gr.9 , nr.1/04
View/Change Diagram
From $1,473.42
Make a selection
Extend the update for your 97-02 Boxster. These are factory OEM units just like the ones seen on the 2003 Boxster and Boxster s.
Known as: trim cover
View/Change Diagram
From $43.13
Make a selection
Extend the update for your 97-02 Boxster. These are factory OEM units just like the ones seen on the 2003 Boxster and Boxster s.
Known as: trim cover
View/Change Diagram
From $43.13
Make a selection
Known as: headlamp litronic 2.0 without ignition control unit see technical information gr.9 , nr.1/04
View/Change Diagram
From $788.67
Make a selection
Known as: oval-head screw m 5 x 18 for mount airbag unit
View/Change Diagram
© 2024 Automobile Atlanta Inc.
505 S. Marietta Pkwy • Marietta, GA 30060 • Order By Phone: 800 792 4944 770 427 2844
|